Viswell Technology Co.,Ltd - Strobe information 
  • Online Live Support:

  • Service Time:Mon to Fri 9:00~18:00

MENU

Home Resource Center FAQ Strobe information

【Resource Center】

2016.10.05
Strobe information

Strobe information

  • Optically isolated opto-isolated input signal, dimmer output circuit does not affect the flash input device.
  • The flash circuit uses a Normal Open protection circuit, not Normal Close. 0V or no flash input signal is kept open (Open) light does not light.
Strobe Control Specification
Strobe Input Power 5V(TTL) 12V 24V Open/Short
Strobe on Input Voltage range 3~10VDC 7~20VDC 18~32VDC Short
Turn-On Time Delay 100uS 100uS 100uS 100uS
Turn-Off Time Delay 1mS 1mS 1mS 1mS

Note: The above design and specifications are subject to change without notice.

Back
Close
Online Live Support
Installation before using SKYPE, Line Software
Service Time:Mon to Fri 9:00~18:00